bibtype	L - Prototype, methodology, f. module, software
ARLID	0434378
utime	20240103204944.3
mtime	20150312235959.9
title (primary) (eng)	Internet of Things Building Blocks for Xilinx Artix7 FPGA with UTIA EdkDSP Accelerators. Vivado 2013.4 Designs with SW Demos
publisher	pub_time 2014
keyword	Internet of Things
keyword	programmable hardware
keyword	embedded floating-point accelerator
author (primary)	ARLID cav_un_auth*0101120 name1 Kadlec name2 Jiří full_dept (cz) Zpracování signálů full_dept (eng) Department of Signal Processing department (cz) ZS department (eng) ZS institution UTIA-B full_dept Department of Signal Processing fullinstit Ústav teorie informace a automatizace AV ČR, v. v. i.
source	url http://sp.utia.cz/index.php?ids=results&id=Utia_EdkDSP_Vivado_2013_4_AC701
cas_special	project project_id 7H14007 agency GA MŠk country BE ARLID cav_un_auth*0307160 abstract (eng) This application note describes the precompiled Vivado 2013.4 Artix7 designs with the floating point EdkDSP accelerators and examples of use of several basic design objects used in the IoT applications. The MicroBlaze SoC design with the AXI bus is based on the Xilinx BIST (build in self-test) provided by Xilinx for the Artix7 AC701 board and the Vivado 2014.3 design flow. The network HW controller is supporting 1Gbit/100Mbit/10Mbit standards with HW DMA and a SW stack based on the lwIP library and the Xilinx application note XAPP1026. The MicroBlaze processor is controlling 6 EdkDSP floating point accelerators. Each accelerator is organised as 8xSIMD reconfigurable data path, controlled by a PicoBlaze6 controller. This evaluation package is provided by UTIA for the Xilinx AC701 board with the 28nm Artix7 xc7a200t-2 FPGA part. This application note explains how to install and use the demonstrator on Windows7, (32 or 64 bit) and Xilinx AC701 board. reportyear 2015 RIV JC permalink http://hdl.handle.net/11104/0239362 confidential S arlyear 2014 mrcbU10 2014